The question of whether epoxy grout is a better product than cement-based grout is really up for debate. There is ample evidence that grout made of cement is porous and vulnerable to weather-related and excessively moist conditions. Grout made of cement is prone to peeling and cracking over time; if left unfinished, its longevity is significantly reduced. Despite this, a lot of pros still use cement-based grout because epoxy grout has a bad reputation for being challenging to work with. In actuality, this isn’t true at all. This myth originates from the fact that epoxy grout had a short pot life—about 45 minutes—and was challenging to apply when it was first introduced. Since then, epoxy grout has advanced significantly. As a matter of fact, modern epoxy grouts come with unique chemicals that facilitate easier cleanup and, consequently, easier handling.
Epoxy grout is very durable and does not require sealing, unlike porous cement grout. This makes it perfect for all types of conditions, including damp environments, high traffic areas, and extreme weather. Unlike cement grout, epoxy grout can be used in bathrooms, showers, and even swimming pools. It can be used both indoors and outdoors.
Epoxy grout is easy to install. Here’s how to install epoxy grout in 5 steps:
Set up the space where your mosaics or tiles will be installed. Make sure you have enough space to work and that the surfaces are clean. Epoxy grout installation is best done at room temperature. The best temperature range to install epoxy grout is between 60°F and 85°F. The epoxy grout will take longer to cure in a room that is colder. Make sure the space where the grout will be installed is completely clean.
Set up your equipment. Keep everything you require handy. This makes it possible for you to work uninterrupted. You will need the following supplies: grout mixture, trowel, electric drill with mixing paddle, bucket of water, scrubpad, and dry sponge.
Combine grout. The Tile Doctor is the only distributor of Litokol Starlike epoxy grout, which is simple to mix. To begin, simply open the paste container (part A), open the catalyst pouch (part B), and combine the two by pouring all of part B into part A. Make sure the two are well combined by thoroughly blending them. Before applying, we advise thoroughly blending the two components with an electric drill and then again with a trowel. You must adhere to the instructions provided by the particular brand of grout you are using, as they may differ. Epoxy grout should have a soft, smooth consistency after being thoroughly mixed with a margin trowel to ensure that all ingredients are combined. Because epoxy grout will become more rigid in cold environments, it’s critical to maintain the proper room temperature and avoid installing it during extreme heat or cold.
Using the unique Green Epoxy Hard Rubber Float from Tile Doctor, grout can be applied to dry joints. Make use of the rubber float to remove any extra product.
It is necessary to clean and complete the grout work while the product is still wet. The fastest time feasible should be used to complete this. Make careful not to wipe product off the tile surface or leave stains in the joints. Sprinkle some clean water on the grouted surface to get this process started. Use lots of water and the white scrub pad provided by Tile Doctor to begin cleaning, and then finish with a standard hydro sponge. After using the sponge, any remaining haze can be removed with a cloth once the grout has begun to set, or you can use the Tile Doctor Haze Remover with a white scrub pad 24 hours later.
Installing premium epoxy grout, such as Starlike grout, is easier than cement grout, and the finished grout installation will be far more resilient and long-lasting.
Some Of Our Products Range Are Below ::
