In residential buildings, moisture or wet walls are the most typical issue. In addition to being unattractive, the issue also contributes to a bad atmosphere because a damp wall frequently encourages the growth of bacteria, mould, and mildew. Plaster, paint, and other surface finishes on walls are permanently harmed by moisture.

What is Seelan ?

The issue is plain to see and is present on every wall in your home. Dampness is evident on both the interior and outside of a wall when it makes touch with the ground.

How to remove Seelan ?

To combat the growing issue of wetness, every space should be dry and well ventilated. There are numerous ways to solve the issue. Look at the list of the most popular methods below:

Damp Proofing: The foundation must be kept dry at all times to prevent difficulties with humidity, seelan, and other factors. In order to create a suitable DPC, a continuous layer of waterproof mortar can be applied. By removing a row of bricks close to the floor’s level and inserting the waterproof mortar, the damp proof course can be installed.

Avoid leakage: Ensure that the rainwater pipes are securely fastened. Additionally, every water supply and sanitary fitting needs to be tight. In addition, rainfall should not get inside any of the structure’s joints. Install the appropriate ventilation if there is any room between the ceiling and the roof.

Repair and re-plaster the surface: If there is a damaged area in your home, patch the surface using a waterproof plaster or cement combination. With the aid of delivery tubes, the re-plastering process may be completed. Simply place the tubes close to the walls and transfuse the liquid; this will act as a membrane and a powerful barrier against moisture and dampness.

Tips to Remove Mold

·         The aforementioned methods for treating dampness should be used, but if you haven’t used them and only want to get rid of the persistent mould and mildew on the walls, you can try some helpful cleaning techniques.

·         The walls can be cleaned with a water and chlorine bleach solution. It works with one part bleach and three parts water.

·         The mould can be removed using any household detergent with bleach as an active ingredient.

·         With a firm brush, the charred area is easily cleanable.

·         Use a decent electric dehumidifier if the walls start to develop mould and mildew again.

·         If your property has poor insulation, mould and mildew may reappear on the walls. To prevent damp situations, ensure that the walls and ceilings are well insulated.

Chemicals to Remove Seelan 

There are many cleaners with chemical formulations on the market that can be utilised for the task. Before using any kind of specialized product, make sure you thoroughly read the instructions and don any necessary protective gear, such as glasses, gloves, and a mask. Seek professional advice as a wholesome and secure substitute. Professionals are trained in the safe application of chemicals and wall rinsing techniques. They are equipped to address the underlying cause of wetness.

Where to Buy:

Chemicals to remove seelan or dampness are now available online for purchasing. We are here for High Quality Seelan waterproofing chemicals With Reasonable Price. We Have Distributers NETWORK Where you can buy our products easily.

Like..

• Seelan waterproofing chemicals in Gujarat
• Seelan waterproofing chemicals Mumbai
• Best Seelan waterproofing chemical Pune
• Seelan waterproofing chemical Manufacturer
• Seelan waterproofing chemicals In Kerala

Building Dampness can be caused by poor design, shoddy construction, and the use of subpar materials. In addition to shortening a building’s lifespan, moisture also makes it difficult for key building components to be constructed in a sanitary manner. The process of keeping the walls, floors, and basement dry is known as damp proofing, but the process of stopping water from leaking from the roof is typically referred to as water proofing.

Defects Resulting from Building Dampness: 

Following is a summary of the different faults that moisture to a building causes:

• Bricks, stones, tiles, and other materials may eventually disintegrate as a result of the efflorescence it creates.
• Plaster may become softer and crumble as a result.
• It may result in paint flaking and bleaching, as well as the creation of coloured patches.
• Timber could end up warping, bending, or decaying as a result.
• Metals may corrode as a result of it.
• Electrical fixtures could deteriorate as a result of it.
• Termite growth is encouraged.
• It makes the inhabitants’ living conditions unhealthy.

Causes of Dampness in Buildings : ( We Have Dampness Protection Chemicals )

One of the main sources of dampness is the absorption of moisture by the construction components. Due to the granular nature of the materials, moisture easily enters the spaces and, with the help of capillary action, is able to move in a variety of directions. As a result, moisture may enter a building’s interior through the wall, floor, or roof due to poor construction practices, incorrect structural design, or the use of faulty structures or materials.

Sources of Dampness in Building

The important sources of dampness may be summarized as below:

• Increasing dampness through the foundation walls. Due to capillary action, moisture from damp ground may rise significantly above the ground level.
• It’s possible for wetness to result from rainwater splashing against a wall’s surface and rebounding.
• Dampness may result from rainwater seeping through exposed wall tops, parapets, compound walls, etc.
• Rainwater may seep through a damaged roof covering in the case of sloped roofs. Furthermore, improper eaves courses and eave or valley gutters may permit rainwater to enter the top supporting wall and result in moisture.
• In the case of flat roofs, insufficient roof slopes, incorrect rainwater pipe connections, and faulty joints between the roof slab and parapet wall may prove to be the cause of dampness.

Methods of Preventing Dampness Chemicals in Buildings

Following methods are generally adopted to prevent the defect of dampness in a structure:

• Damp-proofing membrane
• Complete damp proofing
• Surface manipulation
• Building a cavity wall with Gunite

How Can CHEMAX Help You ?

If you’re looking for a tiling solution or a professional service that helps you treat your damp walls, book it with Chemax Construction Chemical Pvt Ltd today. See the full list of our High Quality Construction Chemical For Dampness in Building.

Chemax is Leading Brand for dampness Protection Chemicals For Walls on home or Any Construction. Our Experts & Quality Checkers check- Dampness Protection Chemicals For Maintain Quality. We Provide Dampness Protection Chemicals on Mumbai, Gujarat, Pune, Navi Mumbai, Kerala Etc

What is Waterproofing ?

Every home needs routine upkeep to avoid water damage. Waterproofing is effective as a wall. An expensive concrete building that has water problems is decaying. The building will last longer overall. For the sake of everyone’s health and wellbeing, indoor water sources should be safeguarded. It seeks to stop water from entering in order to reduce habitat loss, moisture damage, hazardous and unclean conditions, and the degradation of structural components.

To ensure that a material or structure won’t be impacted by water or will be resistant to water penetration, specific measures must be taken. Only to a certain depth in wet or submerged conditions are these goods usable.

Difference Between Water & Damp Proofing

The major distinctions between damp-proofing and water-proofing must be understood before choosing your chosen type of waterproofing chemical. The major differences are evident in the physical attributes. This mainly has to do with the construction supplies that are employed throughout the complete waterproofing process. Additionally, there may be a small difference in the thickness and application conditions for waterproofing and damp-proofing, respectively. But first, let’s quickly look at how these two elements differ from one another.

Damp-proofing:

Damp-proofing is the process of treating a particular surface. It is a coating that is applied to the exterior of the walls manually or with a sprayer, to put it simply. The major goal of this treatment is to safeguard a property by efficiently reducing the seepage of water vapour in addition to blocking the flow of incoming water. In light of this, damp-proofing is a possibility to take into account if worries about moisture have negatively impacted the structural integrity of your property.

Water-Proofing

To date, waterproofing is seen to be more successful than damp-proofing, which is only a simple procedure. The building in issue houses water in a number of states, including water vapour, moisture from the earth, and water under hydrostatic pressure. Therefore, it is always a good idea to choose water-proofing over damp-proofing if investing a lot of money and dedicating adequate time is not a huge concern for you. Both of these therapies are being offered to the best of their abilities by numerous reliable businesses. You can use any of these techniques to provide your walls the best protection possible. You are free to decide. ( Best Terrace Waterproofing Chemicals )

• Important things to take into account while selecting a Waterproofing Solution In Gujarat

Before choosing the best waterproofing material for your house, there are a few things to think about. Let’s look at a couple of them.

• Resistance to UV
• Binding strength
• Increasing Time Robustness

While looking for waterproofing remedies and solutions for your newly constructed home, you may find this list of the top waterproofing businesses in India to be of interest. Before making a decision, you should check internet reviews, and you should choose the Indian waterproofing companies with the best ratings. Build Healer carried out this poll.

Why CHEMAX ?

Chemax Construction Chemical Pvt Ltd is a well-known and reliable manufacturer and exporter of specifically waterproofing chemicals. We provide premium goods and the possibility for customisation. We have been recognised as an ISO 9001:2008 Certified Company by JAS-ANZ. When it comes to the quality of all of our goods, including waterproofing, we have high requirements.

With the aid of qualified experts, we have effectively carved out a position for ourselves in the construction business by offering top-notch waterproofing chemicals, Best Terrace Waterproofing Chemicals, Basement waterproofing chemicals, Swimming Pool Waterproofing Chemicals, throughout the entirety of India. We specifically provide our chemical waterproofing services to manufacturers in Mumbai, Pune, and Kerala, among others.

Some Important Links :

• Waterproofing Chemical in Gujarat
• Waterproofing Solution in Ahmedabad
• Waterproofing Solution Vadodara
• Waterproofing Chemical Manufacturer Gujarat
• Quality Waterproofing Chemical Supplier
• Best Waterproofing Chemical in Gujarat, India

This chemical is used to waterproof plastered surfaces, such as walls and roofs. To ensure that the products won’t be affected during transit, these waterproofing chemicals are expertly wrapped. Only building projects of any kind employ our selection of construction chemicals, such as concrete additive, surface treatment, grout, industrial flooring goods, and structural repair solutions. We already work together on several public and private initiatives !!

We are a Top Supplier of Waterproofing Chemicals. We Have Various type of waterproofing Chemicals like

• CX WATERSEAL WH,
• CX FLEXIBOND 2C,
• CX TRANSCOAT 255,
• CH TRANSCOAT SUPER 111,
• CX DAMPPROOF ULTRA,
• CX COOL-NCOOL HR,
• CX RAINSEAL 01 (FOR WALL),
• CX BLACK COAT 220,
• CX FLEXIBOND CWS,
• CX CRACKFILL PASTE,
• CX JOINT SEALANT PS,
• CX JOINT SEALANT PU

Chemicals CHEMAX, waterproofing of water tanks, If you want to make your house waterproof, the three primary locations to check are the external walls, bathrooms and internal walls. Waterproofing Solutions by CHEMAX.

A house is first and foremost a place where people can feel safe. The fundamental idea of having a secure sanctuary to return to every day is defeated if your home is not waterproofed. Therefore, how do you build a watertight house? In essence, there are five important areas that you should take care of when you consider waterproofing your home, with the exception of the foundation, which needs to be strong, stable, and waterproofed.

Waterproofing on roof:

A home’s roof or terrace is frequently exposed to the elements. Rainwater can flow down into the rest of your home if it is not waterproofed, increasing the likelihood of leaks. Traditional terrace waterproofing techniques include brickbat coba and mud phuska. They can crack because they are inflexible and do not shift with changes in temperature. Instead, waterproof the roof and open terrace areas using the CHEMAX Chemicals line of products.

Water Tank waterproofing:

Particularly if they are on the home’s roof, water tanks must be thoroughly waterproofed. This prevents water from weakening the concrete and safeguards the house against tank leaks. A 2-component epoxy waterproof coating or an acrylic cementitious waterproof coating must be taken into consideration for tank interior waterproofing.

External walls:

External walls, like the patio, are exposed to the weather, especially glaring sunshine and heavy rain. Water can leak inside the walls if they are not waterproofed, causing internal wall damage over time. Try an all-in-one solution like Our Chemicals, which totally waterproofs and also comes in different colours, so that you don’t need an additional coat of paint after the waterproofing, instead of applying a fresh coat of paint to beautify your exterior walls.

The Bathroom:

Bathrooms are moist spaces, and if the tiling was not done appropriately, the moisture and dampness therein could gradually harm your walls. In terms of aesthetics, moist areas can cause paint to flake, which is surely not an attractive sight. However, dampness should never be permitted for safety reasons as well.

Internal walls:

First, internal walls show telltale symptoms of water infiltration. The most typical indication of water infiltration is damp patches on the inside walls, which should be repaired right away to prevent more injury and damage to your home’s walls. For moderate to severe wall moisture, use our waterproofing chemical.

Make careful to choose high-quality goods designed for each of these regions while building a new home. In order to move surface water away from the building, ground surface treatment should also be done there. Waterproofing makes sure you may relax in your Happy Home !!

Conclusion:

The development of a comprehensive range of waterproofing solutions utilized in different residential and commercial construction applications is carried out by CHEMAX, a leading waterproofing manufacturer in India. These products are made with cutting-edge technology in accordance with global building requirements.