CX TRANSCOAT SUPER 111

CX TRANSCOAT SUPER 111 is supplied as a colorless, ready to use, silicone resin solution which can be sprayed or brush applied onto the surface.

Uses : CX TRANSCOAT SUPER 111 is used to provide water repellent surface with improved self cleaning properties on exterior building – brick work, concrete, cement rendering, natural or cast stone. Helps in reducing efflorescence due to soluble salts in brickwork.

Download Technical Data Sheet

Advantages
right

Ready to use

Brush or spray applied direct from container.

right

Self-cleaning

Unaffected by salt-laden atmosphere, reduces unsightly staining.

right

Protects concrete

Reduces causes of cracking and crazing in in-situ or precast concrete.

right

Versatile

Equally effective on old or new surfaces.

right

Protects brickwork

Risk of efflorescence is reduced

right

Colorless

Preserves natural color and texture of created material. Allows surface to breathe.

Specification Clauses
Properties
propertiesValues
Penetration CX TRANSCOAT SUPER 111 penetrates into concrete for a minimum depth of penetration of 2mm
Water resistance Repels rain water and inhibits ingress of surface water provided there is nohydrostatic pressure.
Permeability Permeability is low to water, salt solution, dust and soot particles. Leaching of soluble salts from brick work, which causes efflrescence, absorption of deicing salts by concrete which causes degradation and absorption of atmospheric dirt by brickwork, concrete and stone are all minimized.
Water vapor release CX TRANSCOAT SUPER 111 allows building surfaces to breathe naturally.
Application
  • Preparation : Surfaces should be dry, although slight dampness is not detrimental. Surface to be treated should be free from oil, grease, loose particles, decayed matter and moss or algae growth. For this, cleaning with cleancrete mp is recommended. Joints in brickwork should be sound. If not, should be raked and redone with cement/sand mortar using CBSUPERPLAST IWC waterproofing compound.
  • Coating : Apply CX TRANSCOAT SUPER 111 evenly by spraying or brushing. Ensure an even coat over the entire surface. Porous surface should be well saturated with a two coat application
  • Decorating : Decorative coatings can be applied to surfaces previously treated with CX TRANSCOAT SUPER 111. Water based cement or emulsion paints should not be applied on coated areas. They can be applied before coating the surface with CX TRANSCOAT SUPER 111 coating.
  • Cleaning : Brushes and equipment should be cleaned with CHEMAX Florclean Sol immediately after use.
  • Packaging and coverage : CX TRANSCOAT SUPER 111 is available in 1, 5 & 20 liter containers. On brick work and smooth cement renderings, 4.5 - 9 m2 per liter can be covered depending upon porosity of the substrate.
  • Storage Shelf life : CX TRANSCOAT SUPER 111 has a shelf life of 12 months if kept in a dry store in its original packing. High temperature and humidity storage may reduce this period.
  • Health & Safety instructions : Contact with skin and eyes shall be avoided. Contamination with skin and eyes should be washed with water. CX TRANSCOAT SUPER 111 in liquid state is slightly toxic. Should be kept away from children and animals. Prolonged inhalation of the vapor should be avoided and adequate ventilation be ensured.
  • Fire : CX TRANSCOAT SUPER 111 is inflammable. Liquid vapor should not be exposed to naked flames. Smoking should be prohibited during application.
  • Flash point : CX TRANSCOAT SUPER 111 : 380C

Note: It is important to reseal containers after use to prevent deterioration of the product or evaporation. Any spillage should be absorbed with sand or saw dust.

Waterproofing Chemical Brands