CX SUPERCURE WB is a white, low viscosity wax emulsion which incorporates a special alkali reactive emulsion breaking system. This system ensures that the emulsion breaks down to form a non penetrating continuous film immediately upon contact with a cementitious surface.

Uses : For spraying on freshly cast concrete, or newly exposed concrete surfaces after removal of form work, to form a temporary membrane which will retain sufficient moisture for effective curing to take place.

CX-Supercurewb - plaster materials near me

Download Technical Data Sheet


Single application

Forms moisture barrier for whole of the curing period.



No risk of erratic or poor curing and ensures that cement hydrates efficiently.


Easy and sage spray application

Non-toxic and nonflammable.


No other curing necessary

Eliminates use of water, hessian or sand, completely.


Ensures hard-wearing surface

Minimizes risk of drying shrinkage, cracks and dusty surfaces.

Color Bulk liquid White
Minimum application temperature100C
  • Application : Exposed concrete slabs: CB SUPERCURE WB should be spray applied on to the newly placed concrete slab as soon as possible after it is free from visible surface water, e.g. typically 1 to 2 hours after placing. Shuttered and precast concrete: CX SUPERCURE WB curing agent should be spray applied to all surfaces as soon as formwork has been removed or the element demoulded. In all cases the nozzle of the spray should be held approximately 450mm from the concrete surface and should be passed back and forth to ensure complete and even coverage. The pump pressure should be maintained at a level to produce a fine spray ensuring complete coverage of the surface. Rate of application depends on requirements but is typically within the range of 200 to 285 ml/m2.
  • Equipment cleaning : Immediately after use the spray equipment should be cleaned out thoroughly with fresh water. If the spray nozzle becomes blocked with wax particles these can easily be removed using white spirit or similar fluid.
  • Packaging : CX SUPERCURE WB is available in 20 and 200 Kg drums.
  • Storage : CX SUPERCURE WB has a shelf life of 6 months when stored at temperatures between 50C and 350C. Containers should be kept airtight to prevent surface evaporation. Freezing or prolonged exposure to direct heat or sunlight must be avoided.
  • Health & Safety instructions : CX SUPERCURE WB is non toxic. It is advisable to wear goggles when spraying. Inhalation of the spray should similarly be avoided. Should skin contact with the compound occur it shall be washed with clean water and a skin conditioning cream shall be applied. If CX SUPERCURE WB comes into contact with eye sit shall be washed with clean water. If irritation persists, immediate medical attention shall be sought. If the compound is swallowed, vomiting should not be induced but medical assistance shall be obtained immediately.
  • Fire : CX SUPERCURE WB is water based and non flammable
Chemax WB Application