CHEMAX EPOXY TILE GROUT

CHEMAX EPOXY TILE GROUT consists of a blend of specially selected resins, curing agents, graded inert acid resistant fillers and a unique color pack system.

Uses: To provide a hard wearing, easily cleaned, attractive tile grout where high resistance to chemical
attack is required.

Inquiry
Epoxy Tile Grout

Download Technical Data Sheet

Advantages
right

Excellent resistance

Excellent resistance to industrial chemicals

right

Attractive colors

Available in a range of attractive colors

right

Solvent free

Solvent free – can be used in confined areas

right

formulation

Low odor formulation

right

Attractive appearance

Attractive appearance, easily cleaned

Mechanical Properties
Mechanical properties 20°C  30°C 
Pot life 60 mins 30 mins
Initial Cure 24 hrs  18 hrs
Full Cure 7 days 4 days 
Chemical resistance

CHEMAX EPOXY TILE GROOUT has been formulated specifically to provide the highest chemical resistance. However at elevated temperatures or where a mixture of chemicals is involved the effects may differ from those found in laboratory tests as described above. For further information, please contact the local CHEMAX office. CHEMAX EPOXY TILE GROUT is resistant to a comprehensive range of chemicals commonly encountered in industrial applications; few of them are listed below:

  • Alkali
  • Sodium Hydroxide 50% : Excellent
  • Ammonia (880) 10% : Excellent
  • Solvents
  • Petrol, Oil, Kerosene : Excellent
  • Butanol : Very Good
  • Skydrol : Good
  • Acids
  • Hydrochloric acid 50% : Excellent
  • Nitric acid 25% : Excellent
  • Sulphuric acid 50% : Excellent
  • Phosphoric acid 50% : Excellent
  • Acetic acid 10% : Excellent
  • Lactic acid 10% : Excellent
  • Citric acid : Excellent
  • Other Solutions
  • Bleach (Conc) : Excellent
  • Saturated Sugar : Excellent
  • Urea : Excellent
Application

Instructions

  • Preparation :Joints to be grouted should be clean and free from any dust or debris. Porous tile edges should be primed with CHEMPRIME 25 or CHEMPRIME 31.
  • Mixing : The base and hardener components should be individually stirred to redisperse any settlement which may have occurred. Base & hardener mixed together in a suitable container until a uniform color is obtained. The filler component should then be added to the mixed liquid and blended using a slow speed drill and suitable mixing paddle until a uniform, homogeneous mixture is obtained
  • Application : Apply CHEMAX EPOXY TILE GROUT with a spatula to the spaces between the tiles working the mixture into the joints and around the edges. Remove surplus material from the face of the tiles with a dry cloth, it may be necessary to use small quantities of CHEMAX Solvent 102 to assist in the cleaning process.
  • Cleaning : CHEMAX EPOXY TILE GROUT should be removed from tools, equipment and mixers with CHEMAX Solvent 102 immediately after use. Cured material can only be removed mechanically.

Limitations

  • Limitations : CHEMAX EPOXY TILE GROUT should not be used when the temperature is below 5°C and falling. The product should not be exposed to moving water during application. If any doubts arise concerning temperature or substrate conditions, consult your local CHEMAX office.

Estimating

  • Supply : CHEMAX EPOXY TILE GROUT : 1KG pack(PART A: 900Gms +PART B: 100Gms)
    5KGS pack(PART A: 4.5Kgs+ 500Gms)
  • Yield : CHEMAX EPOXY TILE GROUT : 0.25kgs/ sqm2
  • Shelf life : CHEMAX EPOXY TILE GROUT has a shelf life of 12 months if kept in a dry store in the original, unopened bags or packs.
  • Storage conditions : Store in dry conditions in the original, unopened bags or packs. If stored at high temperature and / or high humidity conditions the shelf life may be reduced to 4 to 6 months.

Precautions

  • Health & Safety : CHEMAX EPOXY TILE GROUT is epoxy resin based. Direct contact with eyes will cause irritation and may cause serious damage if left untreated. Any eye contamination should be washed immediately with clean water and immediate medical attention sought. Gloves and barrier cream such as Kerodex 71 or Rozalex 9 should be used at all times when handling Epoxy Grout. If contact with the skin occurs a resin removing cream such as Kerocleanse 22 or Rozalex 42 should be used followed by washing with soap and water.
Epoxy Tile Grout Supplier Maharashtra
Newer CX Supercure W
Back to list
Older Chemax Anticolor Act 200

Related Projects

  • Accelerators & Concrete Block Admixture
  • Concrete Admixture

CX Fast Set P+

  • Concrete Admixture
  • High Range Water Reducing Admixture (Super Plasticizer)

CHEMAX GROUT A01

  • Concrete Admixture
  • High Range Water Reducing Admixture (Super Plasticizer)

CX AIR ENTRAINING